
CM-1115(20)-RT-AR User Manual
5% to 95% R.H., non-condensing
15 Amps @ 120 Volts (1800W)
20 Amps @ 120 Volts (2400W)
Power Requirement (no load)
UL 1449-2 Adjunct Classification Test Results
1000 surges, 6000 Volts, 3000 Amps,C1 pulse, measured
suppressed voltage 290 Volts, no failures
Maximum Applied Surge Pulse Joule Rating
Unlimited, due to current limiting (8 x 20 µs)
Maximum Applied Surge Pulse Voltage
6000 volts (1.2 x 50 µs pulse),industry standard rating
Maximum Applied Surge Pulse Current
Unlimited, due to current limiting (8 x 20 µs)*
IEEE C62.41-1991 Category B3 (C1)
1 kV>500,000; 3 kV>10,000; 6 kV>1000
145 Volts (resume at 135 Volts)
90 Volts (resume at 100 Volts)
Maximum Load Inrush Energy
1000 Joules total during power-up
EMI/RFI Filter
40 dB@100 kHz;50 dB@300 kHz;50 dB@3 MHz;50 dB@30 MHz
18 dB@300 kHz; 30 dB@1 MHz;50 dB@5 MHz; 50 dB@20 MHz
Remote Control Current Draw
Contact Closure Max. Resistance
Auxiliary Relay Contact Rating
Single 10/100 Unshielded Twisted Pair Ethernet Jack
IP Addressed: DHCP Assigned or Static
Forms Processing Browser Required
UL 1449 3rd Edition In Progress
Directives 89/336/EEC, 92/31/EEC and 93/68/EEC
*1.2 x 50 µs pulse, industry standard combination wave surge, as per IEEE C62.41
CAUTION: Do not install this device if there is not at least 10 meters (30 feet) or more between the
electrical outlet and the electrical service panel.
Kommentare zu diesen Handbüchern